N Fast & worldwide delivery

N Free 24/7 hotline: +43 800 66 55 94

N All products checked by doctors

N Free delivery over 500 €

Envitec – Reusable SpO2 Fingerclip SOFT for MySign

The most important details

Delivery time: immediate delivery

Weight 0.32 kg
Dimensions 16 × 7.2 × 3.9 cm
Technical specification

Display range: Saturation (SpO2) 1 to 100%
Pulse rate (PR) 0 to 300 BPM
Perfusion index (PI) 0.1 to 20
Accuracy: saturation +/- 2% (70 to 100%, without movement disturbances)
Pulse rate +/- 3 BPM (30 to 250 BPM, without movement disturbances)
Display: Time interval of the data update in the display: 300 ms
Plethysmogram: amplitude = 75% of the display area
Operating temperature: 0 ° C – 40 ° C
Operating humidity: 15 – 95% rel. Humidity (non-condensing)
Ambient pressure: 700 to 1060 hPa
Storage temperature: 25 ° C – 70 ° C
Li-Ion battery: 3.6 V 2900 mAh

Operating time per charge:
> 18 hours (with standard settings)
> 24 hours (with the auto-off function switched on with the lowest brightness setting of the display)
Charging power supply: Mini-USB type B, protection class II
Input: AC 110 V – 230 V / 50 – 60 Hz / 125 mA Output: DC 5 V / min. 1 A <15 W.
IEC 60601-1 / IEC 60950-1
Charging time: approx. 4 hours
Device behavior during
while the battery is charging: full functionality guaranteed
Display: 2.8 “multicolor TFT
Protection class: IP 54
Impact resistance: IK 05
Weight: Approx. 320 g (with sensor *)
Interface: USB 2.0 (socket mini USB type B)
Alarm functions: Monitoring of the alarm limits and device functions (optical and acoustic)
Alarm limits (adjustable): SpO2
Upper limit: 51% – 100% SpO2
Lower limit: 50% – 99% SpO2

Pulse
Upper limit: 31 – 250 BPM
Lower limit: 30-249 BPM
Alarm tone: 55 – 75 dB (A)
Pulse tone: variable pitch (depending on the measured SpO2 value)
Application indicator: interval 0 to 8 h
Data storage Max. 96 h with a storage interval of 10 s
(Storage interval can be changed from 5 s to 60 s)
Measured values, date, time, alarm limits, events
Personalization: Device and data record in connection with MySign® software (e.g. name, ward, patient ID)
Protection class: II, type BF
MDD class: IIb
CE marking: CE 0123
Standards: The device complies with the requirements of MDD 93/42 / EEC for medical products
and the corresponding standards (e.g. ISO 80601-2-61) and guidelines.
Also fulfills: DIN EN 1789 ambulance vehicles and their
Equipment – ambulances

  • Finger clip sensor soft / soft
  • also works in cold temperatures
  • good even with low blood pressure
  • measures the oxygen saturation in the blood
  • shows the heart rate

229,17  excl. VAT

x
x

MySign® S finger clip sensor soft / soft
The most important details

  • Finger clip sensor soft
  • also works in cold temperatures and low blood pressure
  • measures blood oxygen saturation and heart rate

Ideal for

  • Doctors (dentists, general practitioners, ordinations, emergency doctors)
  • Use for emergency patients, for short-term and long-term monitoring
  • Short anesthesia and sedation
  • Gastroscopy recovery room
  • Endoscopy recovery room

MySign® S Fingerclip Sensor Soft
Detailed product description

The pulse oximeter from MySign® is the intelligent solution for non-invasive vital signs measurement. With the aid of a finger clip, it measures the oxygen saturation in the blood, as well as the heart rate and provides feedback on whether there is an oxygenation disorder. It can be used on an outpatient and inpatient basis for patient monitoring. Long-term and one-time measurements can be carried out with this device.

The sensor is of very high quality. Due to the very good quality, the MySign pulse oximeter still works very well even in the cold or with low blood pressure.

scope of delivery

  • 1 x FingerCLip Sensor Soft MySign® for adults

Advantages over other products

  • robust
  • Splashproof
  • works well with low blood pressure
  • works well in cold temperatures

fitting products

[sc name=”Produkt USPs”]

<h2 class = “product-questions-heading”> You have a question about this product?< / h2>< p class = “product-questions-text”> If you have a question about the product, please let us know. We will contact you within 24 hours and have the right answer ready for you.< / p>< p class = “product-questions-text”> Even if you cannot find the right product, please feel free to write to us. We’ll find out and get back to you with a personal, free consultation – that’s a promise.< / p>< div class = “product-questions-button-wrapper”><a class = “product-questions-button” href = “https://meinarztbedarf.com/frage-zu-einem-produkt/”> I have a question about the product.< / a><a class = “product-questions-button” href = “https://meinarztbedarf.com/ich-kann-das-passende-produkt-nicht-find/”> I cannot find the right product.< / a></ div>

    Thats what our customers say

    Reviews

    Show reviews in all languages (4)

    Be the first to review “Envitec – Reusable SpO2 Fingerclip SOFT for MySign”

    Your email address will not be published. Required fields are marked *

    You have a question about this product?

    If you have a question about the product, please let us know.
    We will contact you within 24 hours and have the right answer ready for you.

    Even if you cannot find the right product, please feel free to write to us.
    We'll find out and get back to you with a personal, free consultation - that's a promise.